Manual de servicio

Subaru Imprezza System Wiring Diagram. 1. WIRING DIAGRAM The wiring diagram of each system is illustrated so that you can understand the path through which the electric current flows from the battery. Sketches and codes are used in the diagrams. They should read as follows: Each connector and its terminal position are indicated by a sketch of the connector in a disconnected state which is viewed from the front. Electrical wiring harness: The connectors are numbered along with the number of poles, external colors, and mating connections in the accompanying list. A wire which runs in one direction from a connector terminal sometimes may have a different color from that which runs in the other direction from that terminal.In the wiring diagram, connectors which have no terminal number refer to one-pole types. Sketches of these connectors are omitted intentionally. The wire color code, which consists of two letters (or three letters including Br or Lg), indicates the standard color (base color of the wire covering) by its first letter and the stripe marking by its second letter.Each unit is directly grounded to the body or indirectly grounds through a harness ground terminal. Different symbols are used in the wiring diagram to identify the two grounding systems. Each connector number shown in the wiring diagram corresponds to that in the wiring harness. The location of each connector in the actual vehicle is determined by reading the first character of the connector (for example, a “F’ for F8, ‘‘i” for il6, etc.) and the type of wiring harness. The first character of each connector number refers to the area or system of the vehicle.

Download: Subaru Imprezza System Wiring Diagram

ALFA ROMEO MONTREAL ELECTRONIC IGNITION CONTROL UNIT WIRING DIAGRAM. Fitting instructions N. B. . : Failure to follow the fitting instructions voids all warranty rights Before starting any operation disconnect the negative battery connection and reconnect it only once the installation has been completed. During installation avoid touching the connection terminals of the TS control unit socket with your fingers.. Once the old control units have been removed, secure the new TS control units to the vehicle bodywork in the same position. On each unit connect the female connector of the black wire (earth wire from the car wiring loom) to the male connector (1) on the metal shell of the control unit, above the black socket (2) . Insert firmly the three-wire main connector into the black socket (2) of each control unit. Cover the connector/socket assembly with the protective rubber boot of the car wiring loom, blocking it on the ribbing (3) of the connector. Now the installation is completed and the negative battery connection may be reconnected.Details wiring diagram HT coil (bobina) Distribiutor (spinterogeno) Car wiring loom connector (connettore cab) Safety earth (massa) (black wire) Contact breaker point (puntina).

Download: ALFA ROMEO MONTREAL ELECTRONIC IGNITION CONTROL UNIT WIRING DIAGRAM