Manual de servicio

FORD ARIES F450-F550 PARTS AND SERVICE MANUAL. Before road travel always ensure the rail gear is fully raised and the locks are properly engaged. Make sure the steering lock is disengaged. • The steering and braking characteristics of your vehicle will be different due to the rail gear. If you are driving the vehicle for the first time, familiarize yourself with the steering and braking by driving the vehicle in a safe place before taking the vehicle on the road. • Be aware that your vehicle may have reduced ground clearance due to the rail gear. • Approach and departure angles may be different due to the rail gear. This will affect the way you approach dips, ditches, inclines and other surface irregularities. • Do not use the rail gear as a hitch for towing vehicles or dragging objects. Use the correct hitch points on the vehicle frame. Find a suitable road crossing to position the vehicle on rail. If necessary set up cautionary devices to ensure safety. 2. Position the vehicle with the road wheel tires on the rails, and the rail wheel flanges positioned centrally above the railhead. Backing into position is usually easier. 3. Put the vehicle’s transmission into park or neutral. Set the parking brake. 4. Engage the PTO hydraulic pump or start the auxiliary hydraulic power source. 5. The rear will be placed on rail first. a. Raise the rail gear up a bit to relieve the pressure on the lock hook. b. Pull the T-handle for the lock to swing the hook out of the way. c. Lower the rail gear into position on the rail. d. Release the T-handle for the lock. 6. Check the alignment of the front rail wheels with the track – it might be necessary to adjust the position of the vehicle. 7. The front rail gear will now be lowered. a. Raise the rail gear up a bit to relieve the pressure on the pin lock. b. Remove the both pins from the upper holes. c. Lower the rail gear. d. Install the lock pins in the lower holes. 8. Engage the steering lock. 9. Drive the vehicle forward and backward a few yards to check vehicle’s operation and brakes. 10. Vehicle is now ready for rail travel.

Download: FORD ARIES F450-F550 PARTS AND SERVICE MANUAL

FORD CROWN VICTORIA OWNERS MANUAL.2008 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA (fus) Table of Contents Seating and Safety Restraints Seating Safety restraints Airbags Child restraints 101 101 106 121 133 Tires, Wheels and Loading Tire information Tire inflation Tire Pressure Monitoring System (TPMS) Vehicle loading Trailer towing Recreational towing 145 145 147 160 165 171 174 Driving Starting Brakes Traction ControlTM Air suspension Transmission operation 175 175 180 183 186 187 Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Lug nut torque Jump starting Wrecker towing 192 192 193 194 195 203 210 211 216 Customer Assistance Reporting safety defects (U.S. only) Reporting safety defects (Canada only) 217 223 224 Cleaning 225 2 2008 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA (fus) Table of Contents Maintenance and Specifications Engine compartment Engine oil Battery Engine coolant Fuel information Air filter(s) Part numbers Maintenance product specifications and capacities Engine data 232 234 236 239 241 247 263 264 266 269 Accessories Index 272 274 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation.

Download: FORD CROWN VICTORIA OWNERS MANUAL