Manual de servicio

PDF 2004 2006 DODGE RAM 2500 3500 2 4WD DIESEL ENG 3″ BODY LIFT INSTALLATION INSTRUCTIONS

2004-2006 DODGE RAM 2500/3500 2 & 4WD DIESEL ENG 3″ BODY LIFT INSTALLATION INSTRUCTIONS. Installation of a Performance Automotive Group body lift kit will change the vehicle’s center of gravity and handling characteristics both on- and off-road. You must drive the vehicle safely! Extreme care must be taken to prevent vehicle rollover or loss of control, which could result in serious injury or death. Avoid sudden sharp turns or abrupt maneuvers and always make sure all vehicle occupants have their seat belts fas- tened.Proper installation of this kit requires knowledge of the factory recommended procedures for removal and installation of original equipment components. We recommend that the factory shop manual and any special tools needed to service your vehicle be on hand during the installation. Installation of this kit without proper knowledge of the factory recommended procedures may affect the performance of these components and the safety of the vehicle. We strongly recommend that a certified mechanic familiar with the installation of similar components install this kit.Accidental deployment of the air bag can result in serious personal injury or death. To avoid accidental deployment during installation of the kit, the Supplemental Restraint System (SRS, or airbag) must remain deactivated. Do not allow anyone near the airbag during installation. Refer to the factory service manual or owner’s manual for the recommended procedure to disable the SRS. After you install the kit, reactivate the SRS before driving the vehicle.

Download: 2004-2006 DODGE RAM 2500/3500 2 & 4WD DIESEL ENG 3″ BODY LIFT INSTALLATION INSTRUCTIONS