Manual de servicio

PDF Heat Swapper OWNERS MANUAL

Heat Swapper OWNERS MANUAL. The HEAT SWAPPER™ takes heat generated by an existing water heater or boiler and transfers it to another liquid— commonly a pool or spa. The hot water from the heat source is circulated through a stainless steel coil inside the HEAT SWAPPER™. As the spa or pool water passes over the coil, the heat is transferred, but does not mix. The thermostat senses when heat is needed and starts hot water circulating through the coil. When the spa or pool water reaches the selected temperature, it simply turns the Taco circulating pump off. The electronic thermostat is very accurate and maintains the water within 1°F. of the selected temperature. Because of the all stainless steel construction of the heat exchanger, the HEAT SWAPPER™ can tolerate a wider variation of pH than a heater with a heat exchanger made of copper. However it is critical that the pH be maintained between 7.0 and 8.0—even for the stainless steel HEAT SWAPPER™. We do not recommend the Heat Swapper for heating salt water pools. Salt raises the conductivity of water which can make metals in contact with it more susceptible to electrolysis. The HEAT SWAPPER’s best feature is what it does not have—there is no pilot, pilot generator, pressure switch, gas valve, gas line, or flue vent. The HEAT SWAPPER™ is small, heats fast, and the Taco circulation pump uses only 96 watts to transfer the heat from the heat source.


Download: Heat Swapper OWNERS MANUAL